To assess the performance of your disk, compare the CrystalDiskMark results with typical values for different disk types:
Disk Type
Seq Read (MB/s)
Seq Write (MB/s)
4KiB Q32T1 Read (MB/s)
4KiB Q32T1 Write (MB/s)
HDD (7200 RPM)
100-200
100-200
~1
~1
SSD (SATA)
500-550
450-500
250-350
200-300
SSD (NVMe PCIe 3.0)
2000-3500
1500-3000
400-600
300-500
SSD (NVMe PCIe 4.0)
5000-7000
4000-6000
600-800
500-700
These values are approximate and may vary depending on the specific disk model and system configuration.
Interpreting CrystalDiskMark Results
CrystalDiskMark provides a quick and easy way to assess disk performance. High sequential read/write speeds are important for working with large files, and high random read/write speeds are important for overall system responsiveness and fast application startup. If the CrystalDiskMark results are significantly lower than expected, this may indicate a problem with the disk, disk controller, or drivers.
Expert Tip: When testing an SSD, make sure the TRIM function is enabled to ensure optimal performance. TRIM allows the operating system to tell the SSD which data blocks are no longer in use and can be cleared, which prevents performance degradation over time. To check if TRIM is enabled, open a command prompt as administrator and run the command `fsutil behavior query DisableDeleteNotify`. If the result is «0», then TRIM is enabled. If the result is «1», then TRIM is disabled and you need to enable it with the command `fsutil behavior set DisableDeleteNotify 0`.
How to Check Hard Drive Speed on a Windows VDS?
The performance of your hard disk drive (HDD) or solid-state drive (SSD) on your Windows Virtual Dedicated Server (VDS) is crucial for the overall speed and responsiveness of your server. A slow drive can lead to delays in application, database, and website performance. In this article, we’ll delve into various methods and tools to check the disk speed on your Windows VDS, allowing you to identify potential bottlenecks and take steps to address them.
Diskspd is a powerful command-line utility developed by Microsoft for comprehensive disk performance testing. It allows you to conduct various tests, including sequential read and write, random read and write, and more. Diskspd is particularly useful for identifying specific performance issues and optimizing disk configuration.
Example 1: Simple Sequential Write Test
To get started, you need to download Diskspd from the Microsoft website (usually provided as part of the Windows Assessment and Deployment Kit (ADK)). After downloading, extract the archive to a convenient location, such as `C:\Diskspd`.
`-o1`: Specifies the number of outstanding I/O operations as 1.
`-w100`: Specifies that 100% of operations are writes.
`-d30`: Specifies the test duration as 30 seconds.
`-c100m`: Specifies the test file size as 100MB.
`C:\testfile.dat`: Specifies the name of the file that will be used for testing. Ensure that the user under which you run the command has write permissions to the specified directory.
This command will perform a sequential write test with 4KB blocks to the file `C:\testfile.dat` for 30 seconds. The results will be displayed in the console, showing the write speed in MB/s and the number of input/output operations per second (IOPS).
Example 2: Random Read and Write Test
`-w50`: Write operation ratio of 50% (the remaining 50% is read).
`-d60`: Test duration of 60 seconds.
`-c100m`: Test file size of 100MB.
This command will perform a random read and write test with 4KB blocks, using 4 threads and 32 outstanding I/O operations to the file `C:\testfile.dat` for 60 seconds. The results will show the performance of both reading and writing, which is useful for evaluating disk performance under mixed workloads.
Example 3: Using Multiple Files to Emulate Load
Sometimes it is necessary to emulate the load when several processes simultaneously access the disk. Diskspd allows you to do this by specifying several files for testing.
This example uses 3 files (`C:\testfile1.dat`, `C:\testfile2.dat`, `C:\testfile3.dat`). Parameters:
`-b8k`: Block size of 8KB.
`-t8`: 8 threads.
`-o16`: 16 outstanding I/O operations.
`-r`: Random operations.
`-w25`: 25% write operations.
`-d120`: Test duration of 120 seconds.
`-c50m`: Size of each test file is 50MB.
Diskspd will distribute the load between the specified files, which allows for a more realistic assessment of disk performance under resource contention.
Interpreting Diskspd Results
After the test completes, Diskspd outputs detailed statistics, including:
Throughput (MB/s): Shows the data transfer rate in megabytes per second. The higher the value, the better the performance.
IOPS (Operations Per Second): Shows the number of input/output operations performed per second. High IOPS indicates good performance when working with small files and random access.
Latency (ms): Shows the average delay in performing input/output operations. Low latency is critical for applications that require fast response times.
By analyzing these indicators, you can draw conclusions about disk performance in various scenarios. For example, low throughput during sequential writing may indicate problems with the disk itself or the disk controller. Low IOPS during random access may indicate the need to optimize the disk configuration or use a faster drive (for example, SSD instead of HDD).
Expert Tip: For a more accurate assessment of performance, it is recommended to conduct several tests with different parameters and average the results. It is also important to consider the load on the server at the time of testing to exclude the influence of other processes on the results.
Using PowerShell to Test Disk Performance
PowerShell provides convenient tools for monitoring and testing disk performance on a Windows VDS. Using built-in cmdlets, you can obtain information about read/write speeds, IOPS, and latencies, as well as create your own scripts to automate testing.
Example 1: Getting Basic Disk Information
This command retrieves information about disk models, interface type (SATA, SAS, NVMe), and media type (HDD, SSD). This is useful for determining the characteristics of the installed disks.
The expected output will be something like this:
Model InterfaceType MediaType
----- ------------- ---------
Msft Virtual Disk IDE Fixed hard disk media
In this example, you can see that a virtual disk (Msft Virtual Disk) with an IDE interface and «Fixed hard disk media» media type is used.
Example 2: Measuring Read and Write Speed with Test-Path
This method uses the `Test-Path` cmdlet to create, write, and read a small file, measuring the time spent on these operations.
This script creates a 10MB file, fills it with random data, writes it to disk, reads it back, measures the write and read times, calculates the speeds, and deletes the file. The results are output to the console.
Example 3: Using Performance Counters to Monitor IOPS and Latencies
PowerShell allows you to access performance counters that provide information about various aspects of the system, including the disk subsystem.
$Disk = Get-WmiObject Win32_PerfFormattedData_PerfDisk_PhysicalDisk | Where-Object {$_.Name -ne "_Total"}
foreach ($d in $Disk) {
Write-Host "Disk: $($d.Name)"
Write-Host " % Disk Time: $($d.PercentDiskTime)"
Write-Host " Avg. Disk sec/Read: $($d.AvgDisksecRead)"
Write-Host " Avg. Disk sec/Write: $($d.AvgDisksecWrite)"
Write-Host " Disk Reads/sec: $($d.DiskReadPerSec)"
Write-Host " Disk Writes/sec: $($d.DiskWritePerSec)"
}
This script retrieves data about physical disks, excluding the total object («_Total»). For each disk, it outputs the percentage of time the disk is busy, the average time to read and write a sector, and the number of read and write operations per second (IOPS). Note that the values are snapshots in time. For more accurate data, you need to collect data over a period of time and calculate average values.
Interpreting PowerShell Results
Read/Write Speed (KB/s): Higher values indicate faster data transfer. Low speed may indicate a problem with the disk or controller.
% Disk Time: A high percentage (>80%) may indicate that the disk is a bottleneck in the system.
Avg. Disk sec/Read and Avg. Disk sec/Write: Lower values indicate faster processing of I/O operations. Values above 0.01 seconds (10 ms) may indicate performance problems.
Disk Reads/sec and Disk Writes/sec (IOPS): Higher values indicate a larger number of I/O operations that the disk can handle per second. Typical values for HDDs are 50-150 IOPS, for SSDs – thousands or tens of thousands of IOPS.
Expert Tip: PowerShell provides extensive capabilities for automating disk performance testing. You can create scripts that will run on a schedule and collect statistics, allowing you to track changes in performance over time and identify potential problems at an early stage.
Analyzing Disk Performance via Performance Monitor
Windows Performance Monitor (Perfmon) is a graphical tool that allows you to track various aspects of system performance, including disk performance. It provides a wide range of counters that can be used to monitor read/write speeds, IOPS, latencies, and other parameters. Performance Monitor is particularly useful for visually analyzing disk performance in real-time and for identifying load-related issues.
Example 1: Launching Performance Monitor and Adding Counters
Open Performance Monitor by typing `perfmon` in the Windows search bar and pressing Enter.
In the left pane, expand «Monitoring Tools» and select «Performance Monitor».
Click the «+» (Add) icon on the toolbar to add counters.
Example 2: Adding Counters for Disk Monitoring
In the «Add Counters» window, select the «PhysicalDisk» object (for physical disks) or «LogicalDisk» (for logical disks).
Select the desired counters, for example:
«% Disk Time»: The percentage of time that the disk is busy processing requests.
«Avg. Disk sec/Read»: The average time it takes for the disk to read data (in seconds).
«Avg. Disk sec/Write»: The average time it takes for the disk to write data (in seconds).
«Disk Reads/sec»: The number of read operations performed by the disk per second (IOPS).
«Disk Writes/sec»: The number of write operations performed by the disk per second (IOPS).
«Avg. Disk Queue Length»: The average length of the disk request queue.
Select a specific disk instance (for example, «0 C:» for disk C:) or «_Total» for summary statistics for all disks.
Click «Add», then «OK».
Example 3: Analyzing Performance Monitor Graphs
After adding the counters, Performance Monitor will begin displaying graphs showing their values in real time.
% Disk Time: If the graph is constantly at 80% or higher, it may indicate that the disk is overloaded and is a bottleneck.
Avg. Disk sec/Read and Avg. Disk sec/Write: High values (above 0.01 seconds) indicate slow processing of I/O operations.
Disk Reads/sec and Disk Writes/sec: Allow you to evaluate IOPS. Compare the obtained values with typical values for your disk type (HDD or SSD).
Avg. Disk Queue Length: A long queue (>2) may indicate that the disk cannot keep up with requests.
Example 4: Creating a Data Collector Set for Long-Term Monitoring
To analyze disk performance in the long term, you can create a Data Collector Set (DCS) that will automatically collect performance data and save it to a file.
In the left pane of Performance Monitor, expand «Data Collector Sets» and select «User Defined».
Right-click and select «New» -> «Data Collector Set».
Enter a name for the DCS (for example, «DiskPerformance») and select «Create manually (Advanced)».
Select «Create data logs» and check the «Performance counter» box.
Click «Add» and add the desired counters (as described above).
Specify the data collection interval (for example, 1 second).
Specify the location to save log files.
Start the DCS by right-clicking on its name and selecting «Start».
After collecting data, you can open the log files in Performance Monitor and analyze the graphs to identify patterns and anomalies in disk performance.
Interpreting Performance Monitor Results
Performance Monitor provides a visual representation of disk performance data, making it easier to identify issues. It is important to remember that counter values may change depending on the load on the system, so for more accurate results it is recommended to monitor over a long period of time and analyze average values.
Expert Tip: Performance Monitor allows you to create reports that can be used to document disk performance and to compare performance before and after making changes to the system configuration.
Testing Disk Speed with CrystalDiskMark
CrystalDiskMark is a popular free utility for testing the performance of hard drives and solid-state drives (SSDs) under Windows. It provides a simple and convenient interface for measuring sequential and random read/write speeds, as well as IOPS. CrystalDiskMark is often used to compare the performance of various drives and to assess the impact of various settings on performance.
Example 1: Launching CrystalDiskMark and Selecting Test Parameters
Download CrystalDiskMark from the official website and install the program.
Launch CrystalDiskMark.
In the main window, select:
Number of Runs: The number of test repetitions (usually 3-5).
Test Size: The size of the file used for testing (for example, 1GiB).
Drive: The disk you want to test.
Example 2: Running CrystalDiskMark Tests
CrystalDiskMark offers several types of tests:
Seq Q32T1: Sequential read/write with a queue depth of 32 and 1 thread. Emulates the load when multiple requests are sent to the disk simultaneously.
4KiB Q8T8: Random read/write of 4KiB blocks with a queue depth of 8 and 8 threads. Emulates the load when multiple applications access small files simultaneously.
Seq: Simple sequential read/write.
4KiB Q1T1: Random read/write of 4KiB blocks with a queue depth of 1 and 1 thread. Emulates the load when a single application accesses small files.
Click the «All» button to run all tests.
Example 3: Interpreting CrystalDiskMark Results
After the tests are completed, CrystalDiskMark will display the results in a table.
Seq Read/Write: Sequential read/write speed in MB/s. High values are important for working with large files (for example, videos, archives).
4KiB Q32T1 Read/Write: Random read/write speed of 4KiB blocks with a large queue depth. Important for the performance of databases and virtual machines.
4KiB Q1T1 Read/Write: Random read/write speed of 4KiB blocks with a small queue depth. Important for system responsiveness and fast application startup.
Example 4: Comparing CrystalDiskMark Results with Typical Values
To assess the performance of your disk, compare the CrystalDiskMark results with typical values for different disk types:
Disk Type
Seq Read (MB/s)
Seq Write (MB/s)
4KiB Q32T1 Read (MB/s)
4KiB Q32T1 Write (MB/s)
HDD (7200 RPM)
100-200
100-200
~1
~1
SSD (SATA)
500-550
450-500
250-350
200-300
SSD (NVMe PCIe 3.0)
2000-3500
1500-3000
400-600
300-500
SSD (NVMe PCIe 4.0)
5000-7000
4000-6000
600-800
500-700
These values are approximate and may vary depending on the specific disk model and system configuration.
Interpreting CrystalDiskMark Results
CrystalDiskMark provides a quick and easy way to assess disk performance. High sequential read/write speeds are important for working with large files, and high random read/write speeds are important for overall system responsiveness and fast application startup. If the CrystalDiskMark results are significantly lower than expected, this may indicate a problem with the disk, disk controller, or drivers.
Expert Tip: When testing an SSD, make sure the TRIM function is enabled to ensure optimal performance. TRIM allows the operating system to tell the SSD which data blocks are no longer in use and can be cleared, which prevents performance degradation over time. To check if TRIM is enabled, open a command prompt as administrator and run the command `fsutil behavior query DisableDeleteNotify`. If the result is «0», then TRIM is enabled. If the result is «1», then TRIM is disabled and you need to enable it with the command `fsutil behavior set DisableDeleteNotify 0`.
![How to Set Up Automated VDS Backups in [Platform/Location]](https://valebyte.com/blog/wp-content/uploads/2025/11/leonardo_3b4910a9-300x169.jpg)
